Polycom 7000 manual Security Settings, Actions list, select Delete Certificate

System Security

3In the Actions list, select Display Details and confirm that you’ve selected the correct certificate. Then click OK.

4In the Actions list, select Delete Certificate.

5When asked to confirm, click Yes.

A dialog informs you that the certificate has been deleted.

6Click OK.

7Click Restart to Apply Saved Changes, and when asked to confirm that you want to restart the system so that certificate changes can take effect, click OK.

To remove a signed certificate and revert to the default self-signed certificate

1Go to Certificates.

2In the Actions list, select Revert to Default Certificate.

3When asked to confirm, click Yes.

A dialog informs you that the system has reverted to a self-signed certificate.

4Click OK.

5Click Restart to Apply Saved Changes, and when asked to confirm that you want to restart the system so that certificate changes can take effect, click OK.

6After the system restarts, log back in, return to Admin > Local Cluster > Certificates, and verify that the system has reverted to the default self-signed certificate:

a In the list of certificates, select the Server SSL certificate. b In the Actions list, select Display Details.

The Certificate Details dialog appears.

cConfirm from the information under Issued To and Issued By that the default self-signed certificate has replaced the CA-signed certificate.

dClick OK to close the dialog.

See also:

Security Certificates Overview

Certificate Settings

Certificate Procedures

Security Settings

The Security Settings page lets you switch between high security mode and a custom security mode in which one or more insecure capabilities are allowed. It also lets you switch to, but not from, a maximum security mode.

Polycom, Inc. 48