Polycom 7000 manual Local Cluster Configuration, Network Settings

Local Cluster Configuration

This section describes the following Polycom® RealPresence® Distributed Media Application™ (DMA®)

7000 system configuration topics:

●Network Settings

●Time Settings

●Licenses

●Signaling Settings

●Alerting Settings

●Logging Settings

●Local Cluster Configuration Procedures

●Automatically Send Usage Data

These are cluster-specific settings that are not part of the data store shared across superclustered systems. See Introduction to the Polycom RealPresence DMA System.

If you’re performing the initial configuration of your Polycom RealPresence DMA system, study Polycom RealPresence DMA System Initial Configuration Summary before you continue.

Network Settings

The following table describes the fields on the Network Settings page. In the Appliance Edition, most of these values are normally set in the USB Configuration Utility during system installation and rarely need to be changed. In the Virtual Edition, some of these settings are provisioned automatically when the system is deployed with RealPresence Platform Director. See the Getting Started Guide and the Getting Started Guide for a Virtual Environment.

Polycom, Inc. 61