Polycom 7000 manual Conference Events, Property Changes

System Reports

Column

Destination

Cluster

Description

The destination device’s display name, name, alias, or IP address (in that order of preference), depending on what it provided in the call signaling. If the destination is an MCU, the MCU name; if a VSC, the VSC value (not including the VSC).

The cluster (first, if more than one) that handled the call.

The Display Call History command (in the Actions list) takes you to the Call History page and displays the call that was selected in the Associated Calls list.

Conference Events

The Conference Events list provides much more detail about the selected conference, listing every state change and call event in the course of the conference. The following table describes the fields in the list.

Column	Description
Name	Name of the event.
Attributes	Information about the event (varies with the event type).
Call UUID	Call identifier (if call event).
Time	Date and time of the event.
Sequence	Identifies when in the order of changes to this conference this event occurred.

When you select a conference event with a call UUID, the Display Call History command (in the Actions list) takes you to the Call History page and displays the associated call.

Property Changes

The Property Changes list provides more information about the selected conference, listing every change in the value of a conference property during the course of the conference. The following table describes the fields in the list.

Column

Name

Value

Time

Sequence

Description

Name of the call property.

Value assigned to the property.

Date and time of the property change.

Identifies when in the order of changes to this call this property change occurred.

See also:

System Reports

Call History

Polycom, Inc. 410