Polycom 7000 manual Confirm Restore Dialog, Backup and Restore Procedures

System Management and Maintenance

See also:

Management and Maintenance Overview

Recommended Regular Maintenance

Confirm Restore Dialog

Backup and Restore Procedures

Confirm Restore Dialog

The Confirm Restore dialog appears when you select a backup file and click Restore Selected in the Actions list.

If the backup file you selected is from a non-identical version of the software, you’re warned of the possible consequences and asked to confirm that you want to continue.

Select which data you want to restore and click OK. The options may include:

●IP network configuration

●Feature and system configuration

●History, network usage, and log data Which data you can restore depends on:

●The type of backup file (full or config-only) you selected.

●For a restore from a non-identical software version, which restore operations the current version supports for the source version data.

Caution: Restoring config-only backups

Restoring feature and system configuration, but not network configuration (or vice versa) will result in invalid primary or backup cluster assignments for some territories. After the restore operation is complete, go to Network > Site Topology > Territories and assign primary and backup clusters to the affected territories.

See also:

Backing Up and Restoring

Backup and Restore Procedures

Caution: Restoring initiates a system restart

Restoring from a backup restarts the system and terminates all active conferences.

Note: Restoring backups with resource management integration

You can restore the system while it’s integrated with a Polycom RealPresence Resource Manager system, but the result depends on the state when the backup you’re restoring from was made.

If the system was integrated with a Polycom RealPresence Resource Manager system when the backup you’re restoring was made, that integration is restored. If the system wasn’t integrated when the backup was made, it will no longer be integrated after restoring.

Polycom, Inc. 386