Polycom 7000 manual Territory Status, No clusters assigned to list of territories

Models: 7000

1 437
Download 437 pages 17.13 Kb
Page 350
Image 350

System Management and Maintenance

There may be a network problem. Click the link to go to the DMAs page. See also:

Alerts

Territory Status

The following alerts provide information on changes in territory status.

Alert 1103

No clusters assigned to <list of territories>.

The specified territory or territories are not assigned to a cluster, so any responsibilities assigned to the territories are not being fulfilled.

Click the link to go to the Territories page. Assign a primary and backup cluster for every territory in your site topology.

See also: Alerts

Alert 1105

<alerting-cluster>: Primary cluster <p-cluster> and backup cluster <b-cluster> are not reachable. Territory <territory> may not be functioning.

The cluster from which the alert originated is unable to communicate with the specified territory’s primary and backup clusters.

This may be a temporary problem, in which case this alert will be cleared as soon as the alerting cluster is once again able to communicate with the clusters in question.

If this alert reoccurs frequently but quickly goes away, that suggests intermittent spurious network problems. If it persists for more than about 15-30 seconds, it may indicate serious network problems. It’s also possible that someone shut both clusters down, or shut down one and the other then failed, or both failed (unlikely).

Click the link to go to the Territories page. To enable conferencing to continue in the territory (at diminished capacity), assign it to some other cluster.

See also: Alerts

Alert 1106

<alerting-cluster>: Cluster <cluster> is not reachable. Territory <territory> may not be functioning.

The cluster from which the alert originated is unable to communicate with the specified territory’s primary cluster, and there is no backup cluster.

This may be a temporary problem, in which case this alert will be cleared as soon as the alerting cluster is once again able to communicate with the cluster in question.

Polycom, Inc.

350

Page 350
Image 350
Polycom 7000 manual Territory Status, No clusters assigned to list of territories