Polycom 7000 manual Edit Subnet Dialog

Site Topology

Field	Description
Subnet mask length	The CIDR (Classless Inter-Domain Routing) prefix size value (the number of
	leading 1 bits in the routing prefix mask). This value, together with the IP
	Address, defines the subnet.
	For IPv4, a value of 24 is equivalent to specifying a dotted-quad subnet mask
	of 255.255.255.0. A value of 16 is equivalent to specifying a dotted-quad
	subnet mask of 255.255.0.0.
Max total bandwidth (Mbps)	The total bandwidth limit for voice and video calls. If not specified, the site limit
	applies.
Max per-call bit rate (kbps)	The per-call bit rate limit for voice and video calls. If not specified, the site limit
	applies.
	When you specify both the bandwidth and bit rate limits, the dialog shows you
	how many calls at that bit rate the specified bandwidth supports. The value of
	the Bit rate to bandwidth conversion factor setting on the Call Server
	Settings page is used in this calculation.

See also:

Add Site Dialog

Edit Site Dialog

Site Topology Configuration Procedures

Edit Subnet Dialog

Lets you edit a subnet associated with a site.

Note: Subnets and sites

You can assign a subnet to only one site.

The following table describes the fields in the dialog.

Field	Description
Name	The name of the subnet. Required and must be unique.
IP address	The IP address of the subnet.
Subnet mask length	The CIDR (Classless Inter-Domain Routing) prefix size value (the number of
	leading 1 bits in the routing prefix mask). This value, together with the IP
	Address, defines the subnet.
	For IPv4, a value of 24 is equivalent to specifying a dotted-quad subnet mask
	of 255.255.255.0. A value of 16 is equivalent to specifying a subnet mask of
	255.255.0.0.

Polycom, Inc. 295