Polycom 7000 manual Juniper Networks SRC Integration

Integrations with Other Systems

Juniper Networks SRC Integration

You can integrate the Polycom RealPresence DMA system’s Call Server with a Juniper Networks SRC Series Session and Resource Control module to provide bandwidth assurance services. This allows the RealPresence DMA system to consult a configured policy on the Juniper SRC system at call time to assure and/or reserve required network resources for a call. It also allows priority and preemption policies to be applied to RealPresence DMA system calls.

In addition, the RealPresence DMA system’s priority-based QoS packet marking (Gold/Silver/Bronze class of service) is applied by the Juniper SRC system throughout the network it controls.

See also:

Integrations with Other Systems Juniper Networks SRC Page

Juniper Networks SRC Integration Procedure Juniper Networks SRC Integration Pane

Juniper Networks SRC Page

The following table describes the fields on the Juniper Networks SRC page.

Field	Description
Enable integration with Juniper	Enables the SRC integration fields and the Update button, which initiates a
Networks® SRC	connection to the Juniper Networks SRC server.
IP address or host name	The host name or IP address of the SRC server.
Server port	The port number used to connect to the SRC server.
Client ID	The user ID with which the Polycom RealPresence DMA system logs into the
	SRC server.
Client password	The password with which the Polycom RealPresence DMA system logs into
	the SRC server.
Subscriber URI	The subscriber URI of an endpoint known to the SRC server, specified as in
	this example:
	ip:ipAddress=192.168.70.228
	This can be any endpoint for which the SRC server will return information
	when queried to test the connection.

See also:

Juniper Networks SRC Integration

Juniper Networks SRC Integration Pane

Polycom, Inc. 181