Polycom 7000 manual Default Dial Plan and Suggestions for Modifications, Rule Effect

Call Server Configuration

The Default Dial Plan and Suggestions for Modifications

The Polycom RealPresence DMA system is configured by default with a generic dial plan that covers many common scenarios and may prove adequate for your needs. It’s described in the following table.

Rule		Effect
1	Dial registered endpoints by alias	If the dial string is the alias or SIP URI of a registered endpoint, the call
		is routed to that endpoint.
2	Dial by conference room ID	Otherwise, if the dial string is the dial-in number of a conference room
		on the Polycom RealPresence DMA system, the call is routed to that
		conference room.
3	Dial by virtual entry queue ID	Otherwise, if the dial string is the dial-in number of a virtual entry queue
		on the Polycom RealPresence DMA system, the call is routed to that
		VEQ.
4	Dial to RealConnectTM conference	Otherwise, if the dial string is the dial-in number of a Lync conference
		on the Lync AVMCU, the call is routed to an available Polycom MCU
		that supports Lync 2013 and automatically connected to the
		corresponding Lync conference on the AVMCU. (If no Polycom MCUs
		that support Lync 2013 are available, the conference fails to start).
5	Dial services by prefix	Otherwise, if the dial string begins with the configured prefix of a service
		(such as an MCU, ISDN gateway, SBC, neighbor gatekeeper, SIP peer
		proxy, or simplified ISDN dialing service) the call is routed to that
		service.
		Note: For a SIP peer, the dial string must either include the protocol or
		consist of only the prefix and user name (no @domain). For instance, if
		the SIP peer’s prefix is 123, the dial string for a call to
		alice@polycom.com must be one of the following:
		sip:123alice@polycom.com
		123alice

6Dial external networks by H.323 Otherwise, if the address is an external address, the call is routed to

URL, email ID, or SIP URI	that external address (H.323 and SIP calls use the designated SBC for
	the originating site to reach addresses outside the enterprise network;
	see Edit Site Dialog).
	Examples of external addresses:
	H323:johnsmith@someothercompany.com
	sip:johnsmith@someothercompany.com
7 Dial endpoints by IP address	Otherwise, if the address is an IP address, the call is routed to that IP
	address (H.323 calls use the designated SBC for the originating site to
	reach addresses outside the enterprise network).
	Examples of IP addresses:
	1.2.3.4
	1.2.3.4##abc
	sip:abc@1.2.3.4
	sip:1.2.3.4@mycompany.com

Polycom, Inc. 243