Polycom 7000 manual Edit Notification Agent Dialog, Click Add Agent, UDP. See Snmp Overview

Polycom RealPresence DMA System SNMP Support

1Click Add Agent.

2Configure the settings in the Add Notification Agent dialog box.

Field	Description
Enable agent	Select to enable the notification agent.
	Clear to stop using this agent without deleting it.
Transport	The transport protocol for SNMP communications to the host receiver (TCP or UDP).
Address	The IP address of the host receiver (the SNMP manager to which this agent sends
	notifications).
Port	The port that the RealPresence DMA system uses to send notifications. Default
	port–162
Notification type	The type of notification that this agent sends to the notification receiver:
	• Inform–The agent sends an unsolicited message to a notification receiver and
	expects or requires the receiver to respond with a confirmation message.
	• Trap–The agent sends an unsolicited message to a notification receiver and does
	not expect or require a confirmation message.
SNMP version	The version of SNMP used for this agent (v2c or v3).
Security user	For SNMP v3, the user name of the security user authorized to actively retrieve
	SNMP data.

3Click OK.

The agent appears in the Notification Agents list.

Edit Notification Agent Dialog

The Edit Notification Agent dialog lets you enable, disable, or modify an SNMP notification agent. The following table describes the fields in the dialog.

Setting	Description
Enable agent	Enables the notification agent defined below.
	Clearing this check box lets you stop using this agent without deleting it.
Transport	The transport protocol for SNMP communications to the host receiver (TCP or
	UDP). See SNMP Overview.
Address	The IP address of the host receiver (the SNMP manager to whom this agent
	sends notifications).
Port	Specify the port that the DMA system will use to send notifications. By default,
	the DMA system uses port 162.

Polycom, Inc. 435