Polycom 7000 manual Presence Publishing

Conference Manager Configuration

Field	Description
Default max total participants	Specifies the maximum conference size assigned to a conference room if a
	larger or smaller maximum size isn’t specified for it.
	Automatic (the default setting) uses the largest conference size supported by
	the MCU (or by all available MCUs if cascading is enabled) as the default
	maximum.
Default conference template	Default template used by the system. See Conference Templates.
Default conference room territory	The territory assigned to a user’s conference room if it isn’t specified at the
	user or conference room level.
	A conference room’s territory assignment determines which RealPresence
	DMA cluster hosts the conference (the primary cluster for the territory, or its
	backup cluster if necessary). Up to three territories in a superclustered system
	can host conference rooms.
Default MCU pool order	Default MCU pool order used by the system. See MCU Pool Orders.
MCU Selection	The method for the RealPresence DMA system to use when it selects MCUs
	from MCU pools:
	Prefer MCU in first MCU pool ensures that the DMA system will always route
	the call to the first available MCU in the first MCU pool. If no MCU is available,
	the second MCU pool will be searched for an available MCU, and so on.
	Prefer MCU in first caller’s site will match the MCU chosen for the call with
	the site that the first caller’s endpoint belongs to.
Minimum generated room ID	Specify the minimum and maximum values for auto-generated room IDs
Maximum generated room ID	created for custom conference rooms. Values may be up to six digits long, and
	the minimum must be less than the maximum.
	The six-digit limit applies only to generated IDs for custom conference rooms.
Default resource priority	In an Assured Services SIP (AS-SIP) environment, a Local Session Controller
namespace	(LSC) can provide priority-based precedence and preemption services to
	ensure that the most important calls get through. If your organization has
	implemented such a resource prioritization mechanism, set this to the
	namespace being used for resource priority values. If the namespace being
	used isn’t listed, select Custom and enter the name in the box to the right of
	the list.
Default resource priority value	If your organization has implemented a resource prioritization mechanism, set
	this to the default priority value assigned to a conference if the specific
	conference room (VMR) doesn’t have a higher value. If using a custom
	namespace, enter the value in the box to the right of the list.
	The string namespace:value is used in the SIP Resource-Priority header of
	outbound calls from conference rooms (VMRs).
Default Conference Duration	Default maximum duration of a conference (in hours and minutes) or
	Unlimited (the maximum in this case depends on the MCU).
Presence Publishing	This section allows you to configure Polycom conference contact presence
	options.

Polycom, Inc. 184