Polycom 7000 manual Add Site Link Dialog, Edit Site Link Dialog

Site Topology

See also:

About Site Topology

Add Site Link Dialog

Edit Site Link Dialog

Site Topology Configuration Procedures

Add Site Link Dialog

Lets you define a new site link in the Polycom RealPresence DMA system’s site topology. A link can connect two sites, or it can connect a site to an MPLS network cloud (see Network Clouds).

The following table describes the fields in the dialog.

Field	Description
Name	A meaningful name for the link (up to 128 characters).
Description	A brief description of the link (up to 200 characters).
From site	The originating site of the link.
To site	The destination site of the link.
Max total bandwidth (Mbps)	The total bandwidth limit for voice and video calls, which you set at the
	gateway or router.
Max per-call bit rate (kbps)	The per-call bit rate limit for voice and video calls, which you set at the
	gateway or router.
	When you specify both the bandwidth and bit rate limits, the dialog shows you
	how many calls at that bit rate the specified bandwidth supports. The value of
	the Bit rate to bandwidth conversion factor setting on the Call Server
	Settings page is used in this calculation.

See also:

About Site Topology

Site Links

Site Topology Configuration Procedures

Edit Site Link Dialog

Lets you edit a site link in the Polycom RealPresence DMA system’s site topology. A link can connect two sites, or it can connect a site to an MPLS network cloud (see Network Clouds).

You can’t change the sites that a site link connects. To modify how sites are linked, delete the links to be removed and add the new links.

The following table describes the fields in the dialog.

Polycom, Inc. 297