Strata CTX100-S/CTX100 Installation

Installing the CTX100 Cabinet

Do Not Run Cables Out the Top – Cabling from either cabinet should be routed out the lower sides, not from the top of the cabinet(s) (see Figure 3-22).

Power Supply

Power Supply

6008

Figure 3-22 Avoid Improper Cable Routing

2.Remove the left or right cover(s) of the cabinet and knock out the rectangle(s) to create a hole for the cables, as needed (see Figure 3-23).

Note Cables can be run out of either side of Base or Expansion cabinets.

3.Connect applicable wiring (e.g., modular CO line cords, 25-pair amphenol connector cables) to the front of the PCBs as described earlier.

To avoid heat problems, do not store items on top of the cabinets.

Run cables through cover knock-outs holes

5968

(on all side covers)

Figure 3-23 Base and Expansion Cabinet Cables and Connectors

4.Secure all Amphenol cables to the cabinets with tie wraps (see Figure 3-24).

Figure 3-24 Tie-wrap Cables

3-24

Strata CTX I&M 06/04

Page 126
Image 126
Toshiba CTX28 manual Avoid Improper Cable Routing