Toshiba CTX28 manual 11-38, Charging Unit Wall Mounting

Station Apparatus

Cordless Telephone Installation

Charging Unit Wall Mounting

The charging unit is also designed to be wall mounted. Before mounting your charging unit, consider the following:

•

•

•

Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

Make sure the wall material is capable of supporting the weight of the charging unit.

Use #10 screws with anchoring devices suitable for the wall material where the charging unit will be placed.

DKT2204-CT

1.Insert two mounting screws 1-9/10 inches apart. Allow about 3/ 16 of an inch between the wall and screw heads for mounting the telephone.

2.Plug the AC adapter into the charging unit as previously described. Wrap the AC adapter cord around the strain relief (shown right).

3.Place the charging unit on the posts of the wall screws and push down until it’s firmly seated (shown right).

4.Plug the AC adapter into a standard 120VAC wall outlet.

DKT2304-CT

1.Insert two mounting screws 1-1/5 inches apart. Allow about 3/16 of an inch between the wall and screw heads for mounting the telephone (shown right).

2.Pass the one end through the hole of the wall mount stand and plug it into the charging unit. Wrap the AC adapter cord around the strain relief.

3.Slide the wall mount stand into the notches on the bottom of the charging unit.

4.Place the charging unit on the posts of the wall screws and push down until it’s firmly seated (shown right).

5.Plug the AC adapter into a standard 120VAC wall outlet.

11-38 Strata CTX I&M 06/04