IP Telephony and QSIG Over IP

Installing and Operating the SoftIPT

Hardware/Software Required

The SoftIPT works with the Strata CTX100-S, CTX100 and CTX670 telephone systems with CTX R2.1 MG020 or higher.

SoftIPT operation requires a wired or wireless 802.11 connection over the IP network (Internet, WAN, LAN, etc.) to the CTX BIPU-M2A or BIPU-M1A PCB with firmware version 07e or higher IP interface. The voice communications uses the MEGACO+ protocol for call control signaling and RTP for voice transmission.

Note The SoftIPT can work on wireless 802.11 networks (see “Application Notes for Wireless 802.11 Networks” on page 9-26for more information).

A user can install the SoftIPT on a laptop, tablet or desktop PC at the same time, but each should have a unique station ID and license. The SoftIPT works with desktop or laptop PCs with Windows XP, or higher, operating system (OS).

Access points are required for wireless systems. Customers must supply their own access points and headphone/microphones. The SoftIPT requires the use of a headset. Without the headset, the far end of the conversation will hear the echo caused by the laptop's built-in microphone picking up the output of the speaker.

The SoftIPT Graphical User Interface (GUI) has fixed and flexible buttons. Fixed buttons cannot be changed (Intercom, Mute, Voicemail, Directory, Settings, Call Log and Help). Flexible buttons can be assigned different features and labels.

Before You Begin

Important! See the illustration below. You will need to enter items A~E during the installation process. Check with your Telephone System Administrator to make sure that you have this information. After entering this information, we suggest that you print this screen for future reference.

A.SoftDKT extension

number

B.Outside line access code

C.Long distance dialing prefix

D.Enter IP Address of BIPU-MXX PCB

E.Select the network adapter used by

the SoftIPT

6949

Note Changing button labels “Line 1” ~ “Line 6” is optional. You can change these labels, but it does not change the button function. See “Labeling Feature Buttons” for details.

IP Telephony and QSIG Over IP

Strata CTX I&M 06/04

9-19

Page 349
Image 349
Toshiba CTX28 manual Hardware/Software Required, Before You Begin