Toshiba CTX28 manual Basic Specifications

Rack Mount Cabinets 5

The Strata CTX Rack Mount Cabinets consist of a base cabinet (CRSUB672A) and expansion cabinets (CRSUE672A). The cabinets are made of plated sheet metal, dark gray in color.

CAUTION! Toshiba does not support mixing floor/wall-mountable cabinets with Rack Mount cabinets in a system installation (local or remote). Mixing cabinets in an installation causes EMC, EMI, RFI and improper grounding problems. However, you do not have to match the remote cabinets to the local cabinets. For example, the local cabinets can be floor/wall-mountable while the remote ones are rack mount or vice versa.

The 19 inch-wide rack must be supplied by the dealer.

Basic Specifications

	Height: 10.5 inches (267mm)
Dimensions of Base Cabinet	Width: 1.58 feet (483mm—with bracket)
	Depth: 1.17 feet (358mm)
Weight of Base Cabinet	22.04 lbs. (10 kg)
Power Supply Unit (PSU)	BRPSU672A (initially built in)
19" Rack Installation	IEC297-1 (EIA RS 310-D)
Dimension	465.1mm (front face screw pitch – width)
Installation	Cannot be floor or wall mounted.
		BRPSB120A	Option
				Rack
	Power Strip Box1	BRPSB240A	Option
		RPSB2A	Not applicable	Mount
		BPSB240A	Not applicable
	Reserve Power Battery Distribution	BBDB1A	Option	Cabinets
Optional Equipment	Box2
	From PSU to Battery Cable	PBTC1A-3M	Option
	From BBDB to Battery Cable	BBTC1A-2.0M	Option
	AC240V Power Supply Cord	BACL240A	Option
	Conduit Connection Box3	BCCB120A	Not applicable
	(No UL requirement.)	BCCB240A	Not applicable

1.Power Strip Boxes for traditional cabinets cannot be used for rack mount cabinets.

2.Reserve batteries are connected using the same battery distribution box and battery cables as the CTX670 floor/wall-mountable cabinets.

3.Traditional cabinet floor mount conduit connection boxes cannot be used for rack mount cabinets.

Strata CTX I&M 06/04 5-1