Strata CTX670 Installation

Install Processor and Universal PCBs

PCB installation procedures in this chapter. Refer to the Strata CTX Programming Manual for detailed programming instructions.

BCTU1A/BEXU1A Installation

This section explains how to install the new BCTU/BEXU processor PCBs into Strata CTX670 telephone systems. The BCTU/BEXU processor PCBs require Strata CTX Release 2.1, or higher, software and CTX WinAdmin Release 2.1, or higher, software.

The BCTU can be installed without the BEXU for a maximum capacity of 192 ports. It supports the Base and one Expansion cabinet. The BCTU by itself supports all the features and capacities equal to the BECU/BBCU without the BEXS and BBMS expansion PCBs.

If the BEXU is installed with the BCTU, 672 ports are available, along with all the features and capacities equal to the BECU/BBCU with BEXS and BBMS expansion PCBs.

The BCTU or BEXU do not have a built-in modem. The AMDS must be installed on the BCTU if remote administration is required over telephone lines.

CAUTION!

Do not remove the plastic insulation shield from the back of the BEXU PCB. If the shield comes off, do not allow the back of the PCB to contact metal.

The BCTU and BEXU PCBs are shipped from the factory with the battery jumper in the “Off” position. Ensure it is moved to the “On” position before installing the processor to protect customer configuration information stored in the processor RAM. The battery will protect RAM for approximately six years. Otherwise, to conserve the lithium battery, move the jumper to the “Off” position.

When packaging the BCTU and BEXU PCBs, use only a nonconducting material enclosure, such as plain cardboard. Conductive material can cause the internal battery to discharge and erase memory in the BCTU and BEXU PCBs.

Make sure that the power supply is Off when installing the BCTU and BECU PCB or damage to the board could result.

When removing the BCTU1A and BEXU1A, first detach the cable connecting the BCTU and BEXU1A.

4-44

Strata CTX I&M 06/04

Page 170
Image 170
Toshiba CTX28 manual BCTU1A/BEXU1A Installation