Station Apparatus

Telephone Wall Mounting

5. Connect the phone to the wall modular connector with a cord approximately four inches long (available at most telephone supply companies).

6. Route the cord into the hollow portion of the base.

1480

Figure 11-25 Wall Mounting Base Rotation

7.Mount the phone on the wall mounting modular connector plate.

Handset Hanger

1479

Figure 11-26 Handset Hanger

To wall mount DKT3001 or DKT2001 digital

SLTs

Handset Hanger

1.Loosen the screws, and remove the telephone base.

2.Using a suitable cutter, remove the handset hanger from the base.

3.Insert the handset hanger in the slot on the front of the phone. The hanger fits in the notch on the handset cradle.

4.Rotate the telephone base 180 degrees and secure it to the telephone with its four screws.

5.Connect the phone to the wall modular connector with a cord approximately four inches long (available at most telephone supply companies).

6.Route the cord into the hollow portion of the base.

3633

Figure 11-27 Removing the Telephone Base

7.Mount the phone on the wall mounting

modular connector plate. For instructions for installing and programming the DKT2001, see “Digital Single Line Telephone (DKT2001 only)” on page 11-57.

11-28

Strata CTX I&M 06/04

Page 426
Image 426
Toshiba CTX28 manual 11-28, To wall mount DKT3001 or DKT2001 digital SLTs