IP Telephony and QSIG Over IP

Installing and Operating the SoftIPT

Making a Call

The Toshiba SoftIPT integrates the power of a PC with all of the features available on a DKT3000- series telephone, except background music. The main difference is that you use a mouse or stylus to select buttons.

Other than these few differences, you can use most of the features described in the Strata CTX DKT/IPT User Guide, available on the Internet FYI site, Documentation > User Guides. Refer to this guide for instructions on using the other features.

To make a call

1.Click Call. Hear dial tone.

(If you have “hot dialing,” skip this step. Click on a button on the dial pad and if you hear dial tone, you have “hot dialing.”)

2.Click or select the on-screen dial pad buttons to dial a call.

...or if the dialed numbers don’t appear on-screen, click Intercom, then dial by clicking on the dial pad buttons on-screen.

3.When connected to a call, you can

select any of the call buttons, such as Hangup, Redial, Hold or Conf.

4.Click Hangup to end the call.

Note Do not use BGM (#490) on the SoftIPT. It conflicts with incoming calls.

Select or click on

 

If dialed numbers

dial pad buttons

 

don't appear,

 

to call.

 

click Intercom,

 

 

 

 

 

then dial.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6825

When you are on a call, the Call button changes to Hangup. Click Hangup to end the call.

Switching a Call to Your Headset

You can switch a call from your DKT3000- or 2000-series digital telephone to the SoftIPT by placing the call on Hold and using the Call Pickup feature.

1.Press Hold on your digital telephone.

2.On the SoftIPT, dial #5#72 + the extension number of your digital telephone.

9-22

Strata CTX I&M 06/04

Page 352
Image 352
Toshiba CTX28 manual Making a Call, Switching a Call to Your Headset, To make a call