Station Apparatus

Cordless Telephone Installation

Step 7: Raise the Base Unit Antenna

Before using your handset, raise the base unit antenna to the vertical position.

Step 8: Install Handset Battery Pack

DKT2204-CT

1.Remove the battery cover by pressing the latch and sliding the cover down and off the handset.

2.Slide the battery pack down into the handset (shown right).

3.Securely close the battery compartment cover by sliding it up until it snaps into place.

DKT2304-CT

1.Remove the battery cover by pressing the latch and sliding the cover down and off the handset.

2.Connect the battery pack connector observing correct polarity to the jack inside the battery compartment. Do not exert any force on this connection. It could cause damage

to the battery or handset. Once you are certain that you have made a good connection, then insert the battery pack into the battery compartment. Do not pinch the wires (shown right).

3. Securely close the battery compartment cover by sliding it up until it snaps into place.

CAUTION! Rechargeable Nickel-Metal-Hydride batteries must be disposed of properly.

4.

Step 9: Charge Batteries for First Time

Important! Before using your handset, the battery must be continuously charged for five hours.

1. Place the handset in the charging unit (shown at right).

2. Ensure that the CHARGE LED lights. If it does not, make sure that the AC adapter is plugged in and that the handset is making good contact with the charging unit contacts.

DKT2204-CT Charging

Unit (pictured)

Station Apparatus

Strata CTX I&M 06/04

11-39

Page 437
Image 437
Toshiba CTX28 manual Raise the Base Unit Antenna, Install Handset Battery Pack, Charge Batteries for First Time, 11-39