IP Telephony and QSIG Over IP

Installing and Operating the SoftIPT

11.In the Softphone Setting window (shown under “Before You Begin” on page 9-19), enter the following:

SoftIPT extension

Outgoing Prefix (outside line access code, if required)

Long Distance prefix

IP address of BIPU-MXX (xx = version number). See your System Administrator for this address

If there are multiple network adapters, select the one for SoftIPT.

Note Changing button labels “Line 1” ~ “Line 6” is optional See “Labeling Feature Buttons” on page 9-24for details.

12.Click OK. If requested to enter an integer, make sure you have entered a phone extension or area code. From the SoftIPT main screen, click the “X” in the upper right corner (exits the SoftIPT application).

13.Double click on the SoftIPT icon to restart the SoftIPT.

14.Plug in your headset. The next two steps are guides to adjusting the microphone/headset volume.

15.Select Start > Control Panel > Sounds and Audio Devices.

16.On the Voice tab, click Volume. Adjust the Microphone volume. Click Advanced. Make sure all check boxes are off and set MIC volume to 90% high. Select OK. The SoftIPT is ready to use.

Upgrading the SoftIPT

1.Close the SoftIPT application if you are using it.

2.Insert Strata CTX CD-ROM into your CD-ROM drive.

3.Double click on SoftIPT-PCInstaller.exe. The SoftIPT - InstallShield Wizard runs. You will be prompted to select upgrade, repair or remove the program.

4.Click Upgrade or Repair.

5.Click Finish to exit the Wizard. Your SoftIPT is upgraded.

IP Telephony and QSIG Over IP

Step 2: Start the SoftIPT

On a PC, double click on the SoftIPT icon on your PC desktop.

Strata CTX I&M 06/04

9-21

Page 351
Image 351
Toshiba CTX28 manual Upgrading the SoftIPT, Start the SoftIPT