Rack Mount Cabinets

Changing Plug for Power Strip BRPSB240A

5. Pull out cable from the power plug (shown below).

Step 2: Attach NEMA L6-20P Plug to Power Strip

1.Strip 1.49 inches (38mm) of cover off the electrical wire.

2.At the wire tip, strip approx. .47 inches (12mm) from the outer cover of the wire (shown below).

3.Each of the three electrical wires are inserted in a power plug and a screw tightened. The torque of a screw is 0.8[Nm]. The wires and power plug matches in the following manner (shown below):

G (FG) matches the green wire.

Y matches the black wire.

X matches the white wire.

Rack Mount Cabinets

Strata CTX I&M 06/04

5-31

Page 219
Image 219
Toshiba CTX28 manual Attach Nema L6-20P Plug to Power Strip