Toshiba CTX28 manual Telephone Wall Mounting, 11-27, To mount digital telephones

Station Apparatus

Telephone Wall Mounting

5849

Figure 11-23 Tilt Stands in Raised Position for DKT and Two ADMs

Telephone Wall Mounting

This section explains how to mount digital telephones to a wall. See the manufacturer’s documentation for instructions on mounting standard phones.

Notes

●Digital telephones equipped with BPCIs or PDIU-DI2s cannot be wall mounted.

●DKT3014-SDL equipped with a BHEU cannot be wall-mounted.

●2000-series digital telephones with headsets can only be wall mounted with an HHEU2.

To mount digital telephones

Refer to Figures 11-24~11-26and the following steps.

1.Loosen the captive screws, and remove the telephone base.

2.Using a suitable cutter, remove the handset hanger from the base.

3.Insert the handset hanger in the slot on the front of the phone. The hanger fits in the notch on the handset cradle.

4.Rotate the telephone base 180 degrees and secure it to the telephone with its four captive screws.

Note Tilt up the LCD of the DKT3014-SDL before fixing the base.

Handset Hanger

Plastic Tab

1478

Figure 11-24 Removing the Telephone Base

Station Apparatus

Strata CTX I&M 06/04 11-27