Toshiba CTX28 manual 12-6, CTX Modem Programs and Dialing Numbers

Peripheral Installation

Application PC and Server Interfaces

Local CTX

WinAdmin PC

Remote CTX

WinAdmin PC

	Point-to-point		TCP/IP		BCTU,
					BECU or
					ACTU/	Flash
					AMDS	or ROM
RS-232 Cable		33.6 kbps v.34			Modem	and
						RAM
Modem		Dial #19			RSTU
						Time
						Switch
Modem	CO Line	Telephone		CO Line	CO Line
		Network			Circuit
						Strata CTX
						5592

RS-232 Cable

CTX Modem Programs and Dialing Numbers

DID – Program 309: Ring direct to built-in modem.

Ground/Loop – Program 310: Ring direct to built-in modem

Transfer, Tie, or DISA – Program 102: Dial #19 to transfer to or dial the modem directly.

Note: The PC modem can be external or internal.

Figure 12-5 CTX WinAdmin Modem Interface Connection

ACTU or BECU Processor PCB

BSIS (piggy-back) PCB

Port 1

SMDI

Port 2

SMDR

Port 3

BSIS (Port 1-4)

6-wire Modular Cord - telephone cross-pinned type (modular jack locking tabs on the same side of the cord).

Toshiba PPTC or PPTC9 connectors to PC COM port

Stratagy Voice Mail System

Call Accounting System

Port 4

5604

Note: Total data rate four ports combined is 57.6kbps. maximum.

Strata CTX Serial Port Modular Pins:

1	RD	(Data from CTX)
2	TD	(Data to CTX)
3	DSR	(Data Set Ready from CTX)
4	DTR	(Data Terminal Ready to CTX)
5	CD	(Carrier Detect from CTX)
6	SG	(CTX/Terminal Signal Ground)

BSIS RJ11 (Six-pin jack)

Figure 12-6 Serial Port Interface Connections

12-6 Strata CTX I&M 06/04