CTX28 Installation

Installing the CTX28 Cabinet

Installing the CTX28 Cabinet

Check the items shipped.

CHSU28A cabinet

GCTU1A processor PCB

AC adapter

Tie wrap for cable clamp

Tie wrap for AC adapter

Velcro strap for AC adapter cord

Step 1: Mount the Cabinet on the Wall

The Base cabinet is designed to be mounted on a wall or other vertical surface.

WARNING! To prevent electrical shock, make sure the power supply switch is turned Off.

To mount the Base KSU

1.Make sure the location for the CTX28 meets the minimum clearance requirements specified in Figure 1-1 on page 1-2.

2.Loosen the screws on the front cover and the side cover of the Base KSU, remove the covers (see Figure 1-3).

Cover

Screws (6)

Side Cover

= Six cover screws to be removed before mounting

KSU

DC Power LED

Base Cover

Model: CHSU28A

Strata CTX28

Label on edge of

Base KSU

7125a

Figure 1-3 CTX28 Cabinet Exterior

1-6

Strata CTX I&M 06/04

Page 26
Image 26
Toshiba Installing the CTX28 Cabinet, Mount the Cabinet on the Wall, To mount the Base KSU, Cover Screws Side Cover