Station Apparatus

Install TAPI Service Provider

Install TAPI Service Provider

This Desktop Open Application Interface (OAI) Manual provides step-by-step instructions for installing the software application.

1.Insert the Strata CTX CD-ROM into your CD-ROM drive. From the Main Menu, click Install TSP.

2.Follow the on-screen instructions. Toshiba recommends that default settings be used, but alternate paths, program groups, etc., are offered to meet your specific needs.

3.When the Toshiba CTX TSP Configuration screen displays (shown right), type in the following information:

Login Name: Use any name you desire.

Password: Optional, leave blank if not needed.

Extension: Primary DN of connected DKT3000 phone.

Hostname: Typically this is “localhost.”

4.(Optional) Click on Configure Keys. This section enables you to use more useful names for the line appearances on your phone. If you do not change their name, an application will show the line appearances as FB1 through FB20. Only the 20 feature keys of the main phone can be selected for TAPI dialing, using a specific appearance.

5.Click OK to save your entries. An error box displays and you need to click OK again.

6.Click Cancel on the Toshiba CTX TSP Configuration screen to continue. The Add to Startup group screen displays (shown right).

7.If you want the Toshiba CTX TAPI Service Provider program added to the Startup group, click Yes.

8.The installation continues. On the last screen, click Finish.

9.Restart PC to complete the installation.

11-12

Strata CTX I&M 06/04

Page 410
Image 410
Toshiba CTX28 manual Install Tapi Service Provider, 11-12