Toshiba CTX28 manual Add/Edit TSP Configuration Information, Test/Use Tapi Service Provider, 11-13

Station Apparatus

Add/Edit TSP Configuration Information

Add/Edit TSP Configuration Information

1.Select Start > Setting > Control Panel. Select either the Telephony or Phones and Modems (name is dependant upon the operating system used).

2.Select Advanced Tab to see a current list of providers. If “Toshiba CTX TAPI Service Provider” is not found, click ADD, select it and click OK.

3.Highlight “Toshiba CTX TAPI Service Provider” and click Configure. Enter/Edit the information on the screen (see Steps 3 and 4 above for additional information).

4.When finished, click OK > Close.

Test/Use TAPI Service Provider

An easy way to test or use your TAPI Service Provider is to use “Phone Dialer” supplied in most Windows® operating systems. This program is typically found in “Accessories/Communications/ Phone Dialer.”

1.From the Main Menu, select Edit/Options.

2.In the Line Tab choose the Phone option for Preferred Line for Calling.

3.In Line used for Phone Calls, pull-down the list and select the appropriate line to use when making a call. For example:

Toshiba CTX TSP Ext. 3351, Address 0 is typically the primary DN for extension 3351

IPT Telephone

Toshiba offers an Internet Protocol (IP) Telephone model, the IPT1020-SD. The BIPU-M2A PCB IP telephone interface must be installed in the Strata CTX100 or CTX670.

The IPT1020-SD is a 20-button speakerphone model equipped with an LCD that displays two rows of 24- characters. The speakerphone enables users to make and receive outside and internal calls without lifting the handset. A full-duplex speakerphone is not supported.

The IPT has the following features:

•Full DKT feature set (except Speaker OCA)

•DKT Anywhere

•Automatic Configuration

•Terminal Authentication (security)

•Digital Add-on Modules (DADM3120)

•Built-in headset interface for headsets and external speaker connection (HESB)

•See Chapter 9 – IP Telephony and QSIG Over IP for more information on IPTs, the DADM31020 and the BIPU-M2A PCB.

Station Apparatus

Strata CTX I&M 06/04 11-13