Toshiba CTX28 manual Tilt Stands, 11-23

Station Apparatus

Tilt Stands

Tilt Stands

This section explains how to attach desktop tilt stands to 3000-series or 2000-series digital DKTs, the IPT1020-SD or to a DSS console. Use Tilt Stand model “BTSD” (not BTSA) with a standalone DKT, IPT or DSS.

To attach a Tilt Stand to a 3000-series DKT, IPT1020-SD or DSS

1.Plug the phone jack into the bottom of the phone or DSS console.

2.Slide the Address Tray out, then gently squeeze the tray and remove it (see Figure 11-16).

3.Pull the top of the Tilt Stand so that it’s open at an angle.

4.Slide the Tilt Stand into the former Address Tray holder. (The Stand should catch under the front tray holder notches.) Push Stand in until it snaps into place (see Figures 11-17and 11-18).

5.Push in the Lock Release to adjust the tilt angle (0, 10, 20 or 30 degrees, see Figure 11-19).

6.Insert the Address Tray back into its holder.

Plug in phone jack

5448

Squeeze and slide out the address tray

5846

Figure 11-16 Bottom View of Telephone

5847

Figure 11-17 Slide Tilt Stand into Address Tray Slot

Station Apparatus

Lock Button

Release

5848

Notice:

If you change the tilt stand angle, hold the telephone in your hand when you push the release button so the unit does not fall onto the stand.

Figure 11-18 Tilt Stand “Snaps” In Figure 11-19 Telephone on a Tilt Stand

Strata CTX I&M 06/04 11-23