Chapter 7 Off-premise Message Notification 91

About setting up Off-premise Message Notification to a pager number

Example of a destination pager number

If you are assigning a pager destination number from behind a PBX, remember to insert a · (depending on your system) before the £to access an outside line.

There is a combined limit of 30 characters for the pager phone number and the pager message.

For example, to reach your pager, enter:

£›¤fififi⁄¤‹›£‹

where:

£specifies the next digits are special characters

recognizes dial tone

¤specifies that the next digits are the numbers to be dialed

fififi⁄¤‹›is the pager phone number dialed

inserts a timed pause

Depending on the company supplying your paging service, the programming sequence can vary. For more information about setting the destination phone number parameters for your pager, contact your pager company.

To set up Off-premise Message Notification to a pager

1Press ·°⁄.

Follow the voice prompts or the display button options to open the skillset mailbox.

2If you use the CallPilot interface:

Press °fito open the Mailbox Tools

Press NOTIF or ¤to open the Off-premise Message Notification menu

Go to step 3

If you use the Norstar Voice Mail interface:

Press ADMIN or °

Press to open the Off-premise Message Notification menu

Go to step 3

Nortel Networks Call Center Set Up and Operation Guide

Page 91
Image 91
Nortel Networks P0605665 03 To set up Off-premise Message Notification to a pager, Example of a destination pager number