Teledyne 9110T Display Screen and Touch Control Description, Field Description/Function

Model 9110TH NOx Analyzer					Getting Started
Table 3-2:	Display Screen and Touch Control Description
Field					Description/Function
Status	LEDs indicating the states of Sample, Calibration and Fault, as follows:
		Name	Color	State	Definition
				Off	Unit is not operating in sample mode, DAS is disabled.
				On	Sample Mode active; Front Panel Display being updated; DAS data
		SAMPLE	Green		being stored.
				Blinking	Unit is operating in sample mode, front panel display being updated,
					DAS hold-off mode is ON, DAS disabled
				Off	Auto Cal disabled
		CAL	Yellow	On	Auto Cal enabled
				Blinking	Unit is in calibration mode
		FAULT	Red	Off	No warnings exist
				Blinking	Warnings exist
Conc		Displays the actual concentration of the sample gas currently being measured by the analyzer in the
		currently selected units of measure.
Mode		Displays the name of the analyzer’s current operating mode
		Displays a variety of informational messages such as warning messages, operational data, test function
Param
		values and response messages during interactive tasks.
Control Buttons		Displays dynamic, context sensitive labels on each button, which is blank when inactive until applicable.

Figure 3-3 shows how the front panel display is mapped to the menu charts illustrated in this manual. The Mode, Param (parameters), and Conc (gas concentration) fields in the display screen are represented across the top row of each menu chart. The eight touch control buttons along the bottom of the display screen are represented in the bottom row of each menu chart.

Teledyne Analytical Instruments 35