Teledyne 9110T Option Description/Notes Reference Number, Ambient Zero and Ambient Span Valves

	Model 9110TH NOx Analyzer			Introduction
Option		Option	Description/Notes	Reference
		Number
Carrying Strap/Handle			Side-mounted strap for hand-carrying analyzer
			Extends from “flat” position to accommodate hand for carrying.
		29	Recesses to 9mm (3/8”) dimension for storage.	N/A
			Can be used with rack mount brackets, Option 21.
			Cannot be used with rack mount slides.
			CAUTION – GENERAL SAFETY HAZARD

THE 9110T ANALYZER WEIGHS ABOUT 18 KG (40 POUNDS).

TO AVOID PERSONAL INJURY WE RECOMMEND THAT TWO PERSONS LIFT AND CARRY THE ANALYZER. DISCONNECT ALL CABLES AND TUBING FROM THE ANALYZER BEFORE MOVING IT.

	Analog Input and USB port			Used for connecting external voltage signals from other instrumentation (such as
				meteorological instruments).
		64B		Also can be used for logging these signals in the analyzer’s internal		Sections 3.3.1.2,
				DAS		and 7
	Current Loop Analog			Adds isolated, voltage-to-current conversion circuitry to the analyzer’s analog
	Outputs			outputs.
				Can be configured for any output range between 0 and 20 mA.		Sections 3.3.1.4
41				May be ordered separately for any of the analog outputs.
						and 5.9.3.7
				Can be installed at the factory or retrofitted in the field.
	Parts Kits			Spare parts and expendables
				Expendables Kit includes a recommended set of expendables for
		42A		one year of operation of this instrument including replacement		Appendix B
				sample particulate filters.
43				Expendables Kit with IZS includes the items needed to refurbish		Appendix B
				the zero air scrubber.
45				Spare Parts Kit includes spares parts for one unit.		Appendix B
	Calibration Valves			Used to control the flow of calibration gases generated from external sources,
				rather than manually switching the rear panel pneumatic connections.
		50A		AMBIENT ZERO AND AMBIENT SPAN VALVES		Section 3.3.2.3
				Zero Air and Span Gas input supplied at ambient pressure.
				Gases controlled by 2 internal valves; SAMPLE/CAL & ZERO/SPAN.
				AMBIENT ZERO AND PRESSURIZED SPAN VALVES
				Span Gas input from external, pressurized source;
				Span Gas flow rate maintained at 1 ATM by critical flow orifice & vented
		50B		through Vent port.		Section 3.3.2.4
				Shutoff valve stops flow of Span Gas when in sample mode to preserve
				pressurized gas source.
				Zero Air created via 2-stage scrubber & dry filter unit (DFU).
				Gases controlled by 2 internal valves; SAMPLE/CAL & ZERO/SPAN.
				ZERO SCRUBBER AND INTERNAL SPAN SOURCE (IZS)		Sections 3.3.2.5
		50G		Span Gas generated from internal NO2 permeation tube
				Zero Air created by 2-stage scrubber & DFU.		and 3.3.2.6
				Gases controlled by 2 internal valves: Sample/Cal & Zero/Span.
	NO2 Permeation Tubes			Replacement tubes; identical size/shape; different permeation rates.
				Permeation Rate	Approximate NO2 Concentration @ 50°C
			(± 25%)
		52B		421 ng/min	300ppb – 500 ppb ± 25%	N/A
		52G		842 ng/min	0600 – 1000 ppb ± 25%	N/A
		Each tube comes with a calibration certificate, traceable to a NIST standard,				Section 3.3.2.5
		specifying its actual effusion rate of that tube to within ± 5% @ 0.56 liters per

Teledyne Analytical Instruments 25