Teledyne 9110T instruction manual NO, 0, 212, Reported NO2, 0, 213, Reported

Model 9110T NOx Analyzer Communications Setup and Operation

∙1 - The HESSEN protocol will always use RANGE1 for this gas list entry

∙2 - The HESSEN protocol will always use RANGE2 for this gas list entry

∙3 - Not applicable to the 9110T analyzer.

GAS ID An identification number assigned to a specific gas. The 9110T analyzer is a multiple gas instrument that measures NOx, NO and NO2. Their ID numbers are as follows:

NONOx212211

NO2 213

REPORT States whether this list entry is to be reported or not reported when ever this gas type or instrument is polled by the HESSEN network. If the list entry is not to be reported this field will be blank. It’s default gas list consists of only reads:

NOX, 0, 211, REPORTED

NO, 0, 212, REPORTED

NO2, 0, 213, REPORTED

These default settings cause the instrument to report the concentration value of the currently active range. If you wish to have just concentration value stored for a specific range, this list entry should be edited or additional entries should be added to the list.

EXAMPLE: Changing the above NOx gas list entry to read:

NOX, 2, 211, REPORTED

Would only record the last NOx reading that occurred while RANGE2 (HIGH) range was active.

EDITING OR ADDING HESSEN GAS LIST ENTRIES

To add or edit an entry to the Hessen Gas List, press:

Teledyne Analytical Instruments 156