Teledyne 9110T instruction manual Teledyne Analytical Instruments 145

Model 9110TH NOx Analyzer Communications Setup and Operation

SETUP X.X COMMUNICATIONS MENU

ID INET COM1 COM2 EXIT

From this point on,

EXIT returns to

COMMUNICATIONS

MENU

SAMPLE		ENTER SETUP PASS : 818
8	1	8	ENTR EXIT
				DHCP: ON is
				default setting.
SETUP X.X		DHCP: ON
				If it has been
				set to OFF,
SET>		EDIT	EXIT	press EDIT
				and set to ON.

SETUP X.X	DHCP: OFF
OFF	ENTR	EXIT
SETUP X.X	DHCP: ON
ON	ENTR	EXIT

SETUP X.X INST IP: 0.0.0.0

<SET SET> EXIT

SETUP X.X GATEWAY IP: 0.0.0.0
<SET SET>	EXIT
SETUP X.X SUBNET MASK: 0.0.0.0
<SET SET>	EXIT

EDIT button

disabled

SETUP X.X TCP PORT: 3000

<SET SET> EDIT EXIT

Do not alter unless

directed to by Teledyne Instruments Customer Service personnel

	SETUP X.X	TCP PORT2: 502
	<SET SET> EDIT		EXIT
	SETUP X.X	HOSTNAME:
	<SET	EDIT	EXIT
		Figure 6-5.	COMM – LAN / Internet Automatic Configuration (DHCP)
Note		If the gateway IP, instrument IP and the subnet mask are all zeroes (i.e.,
		“0.0.0.0”), the DCHP was not successful in which case you may have to
		configure the analyzer’s Ethernet properties manually. See your network
		administrator.

Teledyne Analytical Instruments 145