Teledyne 9110T Password Security, Primary Setup Menu, Secondary Setup Menu Setup MORE

Model 9110TH NOx Analyzer Overview of Operating Modes

4.3.1. PASSWORD SECURITY

SETUP Mode can be protected by password security through the SETUP>PASS menu (Section 5.5) to prevent unauthorized or inadvertent configuration adjustments.

4.3.2. PRIMARY SETUP MENU

The areas accessed and configured under the primary SETUP Mode menu are shown in Table 4-4.

Table 4-4: Primary Setup Mode Features and Functions

	CONTROL		MANUAL
MODE OR FEATURE	BUTTON	DESCRIPTION	SECTION
	LABEL
Analyzer Configuration	CFG	Lists button hardware and software configuration information.	5.1
Auto Cal Feature	ACAL	Used to set up and operate the AutoCal feature.	5.2, 9.5
		∙ Only appears if the analyzer has one of the calibration valve
		options installed.
Internal Data Acquisition	DAS	Used to set up the DAS system and view recorded data.	7
(DAS)
Analog Output Reporting	RNGE	Used to configure the output signals generated by the	5.4
Range Configuration		instruments analog outputs.
Calibration Password Security	PASS	Turns the calibration password feature ON/OFF.	5.5
Internal Clock Configuration	CLK	Used to set or adjust the instrument’s internal clock.	5.6
Secondary SETUP Mode	MORE	This button accesses the instruments secondary setup menu.	See
(Advanced SETUP features)			Table 4-5

4.3.3. SECONDARY SETUP MENU (SETUP MORE)

The areas accessed and configured under the secondary SETUP Mode menu are shown in Table 4-5.

Table 4-5: Secondary Setup Mode Features and Functions

	CONTROL			MANUAL
MODE OR FEATURE	BUTTON		DESCRIPTION	SECTION
	LABEL
External Communication		Used to set up and operate the analyzer’s various external I/O
	COMM	channels including RS-232; RS-485, modem communication		8
Channel Configuration
		and/or Ethernet access.
		Used to view various variables related to the instruments
		current operational status.
		∙	Changes made to any variable are not acknowledged and
System Status Variables	VARS		recorded in the instrument’s memory until the ENTR button	5.8
		∙	is pressed.
			Pressing the EXIT button ignores the new setting.
		∙	If the EXIT button is pressed before the ENTR button, the
			analyzer will beep alerting the user that the newly entered
			value has been lost.
		Used to access a variety of functions that are used to configure,
System Diagnostic Features		test or diagnose problems with a variety of the analyzer’s basic
and	DIAG	systems.		5.9, 5.9.2
Analog Output Configuration		Most notably, the menus used to configure the output signals
		generated by the instruments’ analog outputs are located here.

Teledyne Analytical Instruments 93