Teledyne 9110T instruction manual Disk-On-Module, Flash Chip

Models: 9110T

1 378
Download 378 pages 16.38 Kb
Page 340
Image 340

Model 9110T NOx Analyzer

Principles of Operation

Figure 13-14: CPU Board

The CPU includes two types of non-volatile data storage: a Disk-on-Module (DOM) and an embedded flash chip.

13.3.2.1. Disk-On-Module

The DOM is a 44-pin IDE flash drive with storage capacity to 128 MB. It is used to store the computer’s operating system, the Teledyne firmware, and most of the operational data generated by the analyzer’s internal data acquisition system (DAS).

13.3.2.2. Flash Chip

This non-volatile, embedded flash chip includes 2MB of storage for calibration data as well as a backup of the analyzer configuration. Storing these key data on a less heavily accessed chip significantly decreases the chance of data corruption.

In the unlikely event that the flash chip should fail, the analyzer will continue to operate with just the DOM. However, all configuration information will be lost, requiring that the unit be recalibrated.

13.3.3. MOTHERBOARD

This PCA provides a multitude of functions including, A/D conversion, digital input/output, PC-104 to I2C translation, temperature sensor signal processing and is a pass through for the RS-232 and RS-485 signals.

Teledyne Analytical Instruments

340

Page 340
Image 340
Teledyne 9110T instruction manual Disk-On-Module, Flash Chip