SA F E T Y NO T E S /RE G U L A T O R Y IN F O R M A T I O N
•If any of the following conditions occur, immediately switch off the power to the machine and disconnect the power cord from the electrical outlet. Call an authorized Xerox service representative to correct the problem.
–The machine emits unusual noises or odors.
–The power cord is damaged or frayed.
–A wall panel circuit breaker, fuse, or other safety device has been tripped.
–Liquid is spilled into the press.
–The machine is exposed to water.
–Any part of the machine is damaged.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the back of the machine as a
Laser Safety
Use of controls, adjustments, or procedures other than those specified in this documentation may result in a hazardous exposure to laser radiation. This equipment complies with international safety standards. With specific regard to laser safety, the equipment complies with performance standards for laser products set by government, national, and international agencies as a Class 1 laser product. It does not emit hazardous light, as the beam is totally enclosed during all phases of customer operation and maintenance.
iv
