![](/images/new-backgrounds/1185711/185711101x1.webp)
US E R G U I D E (C O P I E R )
Paper Trays
Trays 1,2,3 and 4 are located at the lower front of the printer/ copier. Tray 5 (Bypass) is located on the left side of the printer/ copier.
Tandem Tray Module Trays 1and 2 are adjustable from 5.5x8.5 in. through 11x17 in. (A5 through A3) and can accommodate up to 520 sheets based on paper weight. Trays 3 and 4 are high capacity paper trays and can accommodate a total of 2000 sheets, 8.5x11 in. (A4 and B5) based on paper weight.
Tray 5 (Bypass) Feeds specialty papers i.e. Transparencies, Extra Heavyweight and
Trays 1 - 4 can feed paper weights 64 to 105 gsm. The machine automatically detects the size and orientation of loaded paper. The paper type however must be set on the control panel. Bond paper is the default setting. Plain or Recycled paper in trays must be identified on the control panel for maximum efficiency and image quality. This is set in System Settings mode.
Output Trays
The Center Output Tray delivers output face down, and holds up to 400 sheets. The Center Output Tray holds up to 200 sheets when the Finisher (optional accessory) is installed.
The Finisher Tray (optional accessory) holds up to 1000 sheets, and can staple dual and single staples.
NOTE: The WorkCentre 24 printer/copier should not be moved after it has been installed. Moving may damage the equipment, carpet or floor. If equipment must be moved, please contact your Xerox representative for assistance.