US E R G U I D E (MA C H I N E A D M I N I S T R A T O R )
Others (Print Mode Settings)
In Others, several
Print Area Set whether or not to extend the printing area. The default is Normal.
Substitute Tray Set whether or not to switch to paper in a different tray when the tray that was selected in Auto Tray Switching runs out of paper. To substitute other paper, the size of the paper must be specified.
•Display Message - Displays the message to add more paper without substituting other paper.
•Use Larger Size - Substitutes with paper of the next size of paper larger than the currently selected size. The image will be printed at 100% magnification.
•Use Nearest Size - Substitutes with paper nearest to the currently selected size, and prints on that paper. The image will be automatically reduced if it is necessary.
The default is Display Message.
NOTE:If the paper size is specified by the client, the client setting is given priority.
Banner Sheet Set whether or not to output copies with a banner sheet attached.
•Start Sheet - Banner sheet is printed before the job.
•End Sheet - Banner sheet is printed after the print job.
•Start Sheet + End Sheet - Banner sheets are printed before and after the print job.
The default is Start Sheet.
NOTE:Banner sheets are not output if stapling is set. Banner sheets are added to meters when they are printed.
Banner Sheet Tray Select the tray to be used for the banner sheets. Trays 1 - 5 (Bypass) can be selected. The default is Tray 1. The banner sheet will be printed on whatever paper size is loaded in the selected tray.
