Xerox M24 manual Center Tray or Finisher Tray has been installed

US E R GU I D E (PR I N T )

	Printer Features Settings
Output Tray	Set the destination for the output.
	• The items that can be selected vary according to whether
	the Center Tray or Finisher Tray has been installed.
Job Offset	Shifting the output positions of adjacent jobs (print command) or
	copies (sets) is called Job Offset. The positions of adjacent jobs or
	sets of copies are shifted to the front and the next job or set of
	copies is shifted to the back.
Transparency Separators	Specify whether to use transparency separators and the source of
	the separators.
	Select Auto for three paper source to automatically feed from the
	paper tray with paper of the same size and in the same orientation
	as the transparencies.
	NOTE: When using Transparency Separators, be sure to load
	paper of the same size and in the same orientation as
	transparencies into the paper tray.
	NOTE: The Transparency Separators function cannot be used in
	the following situations:
	• When anything other than Manual feed is selected for
	Paper source in the Paper/Quality tab.
	• When anything other than Transparency is selected for
	Media type in the Paper/Quality tab.
	• When anything other than Center Output Tray is selected
	for Output Destination in the Advanced Options tab.
Bypass Feed Orientation	Specify the paper orientation when printing from the bypass tray.
	When you set the short side of the paper in the bypass tray feed
	direction, select Landscape. When you set the long side of the
	paper in the bypass tray, select Portrait.

2–50