Xerox M24 manual Other Settings Scanner

US E R GU I D E (MA C H I N E AD M I N I S T R A T O R )

Other Settings (Scanner)

This section describes how to set other scanner-related settings. The following items can be configured in Other Settings.

Scan Service Set whether or not to enable scan features. The default is Enabled.

Memory Full Procedure Set the processing method when the scanner runs out of memory during scanning. Set whether or not to enable documents stored so far.

Enter the setting on the Numeric Keypad using the numbers listed in the following table. The default is 1, Enabled.

Setting	Description
0	Disabled (Discard
	stored documents)
1	Enables stored data

Maximum Stored Pages Set the maximum number of stored pages for scanning. Set any number between 1 ~ 999.

Enter the number of the pages using the Numeric Keypad. The default is 999.

Lighter/Darker Level Set the default for the density assigned to Lighter ~ Darker in Lighter/Darker/Contrast on the Image Quality/File Format screen in Scan mode. Set the density between -100 ~ +100 in increments of 1.

Lighter (+3) ~ Lighter (+1) must be set between -100 and -1, and Darker (+1) ~ Darker (+3) must be set between +1 ~ +100. Normal, 0, cannot be changed. Set so that the values increase from Lighter (+3) to Darker (+3).

Select scanning density using the up and down arrow buttons on the left, and set the value using the up and down arrow buttons on the right.

4–56