US E R G U I D E (MA C H I N E A D M I N I S T R A T O R )
Auto Clear Sets the time to wait before returning the Control Panel to the default screen. The amount of time until reset can be set to:
•0 OR
•60 ~ 240 seconds, in 60-second increments.
Enter the value using the numeric keypad on the Control Panel. The default is 60 seconds.
Auto Job Release Tells the machine to release the current job to enable the execution of the next job when a fault occurs during copying or scanning. The job can be executed only in parts of the machine that are functioning normally. Set the time to:
•0 - do not automatically release the job.
•240 ~ 5940 seconds (4 ~ 99 minutes) in
Enter the value using the numeric keypad on the Control Panel. The default is 600 seconds.
Auto Print Allows the machine to automatically start print jobs when there has been no activity for a set amount of time. Set the time to:
• 1 ~ 240 seconds in 1-second increments.
Enter the value using the number keys on the Control Panel. The default setting is 10 seconds.
Auto Power Saver Low Power Mode and Sleep Mode are part of the
•Set the time to Low Power Mode from 6 ~ 240 minutes and
•Set the time to Sleep Mode from 0 ~ 234 minutes
Both are set in 1 minute increments.
NOTE: Low Power Mode cannot be disabled. The total set time of both Low Power Mode and Sleep Mode must be between 15 - 240 minutes.
