Xerox M24 manual Finisher Optional Accessory, Using the Finisher

US E R G U I D E (C O P I E R )

Finisher (Optional Accessory)

The WorkCentre 24 printer/copier may be equipped with an optional Finisher. The Finisher contains the following components:

Finisher Cover Button Provides access to the Finisher paper path. Finisher Tray Completed jobs are delivered to this tray.

Finisher Front Door Provides access to the Stapler area. Staple Cartridge Load a new staple pack when needed.

Finisher Stand Supports the Finisher and may be used for storage. Finisher Interface Delivers the copies to the Finisher.

Center Tray Exit Cover Provides access to the paper path.

WARNING: Never cheat the safety interlock switch. Injury or a document jam may occur. This switch shuts off the Finisher power when you open the front door or when you move the Finisher to the right to clear a paper jam.

Using the Finisher

The Finisher can staple from 2 to 50 sheets (50-sheet maximum applies to up to 24lb / 90 gsm paper.) You can staple both portrait and landscape documents with single or dual staples. Output to the Finisher Tray is delivered face down. The Finisher Tray can hold up to 1000 sheets.

•Jobs containing more than 50 sheets will not be stapled.

•Tray 5 (Bypass) cannot be selected as the paper source for a job going to the Finisher.

1–93