SA F E T Y NO T E S /RE G U L A T O R Y IN F O R M A T I O N
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A FCC compliant telephone cord and modular plug is provided with this equipment.
You may safely connect the machine to the following standard modular jack: USOC
To order the correct service from the Telephone Company please quote the codes listed in the table: Facility Interface Code (FIC), Service Order Code (SOC), USOC Jack Code and Ringer Equivalence Number (REN)
|
|
|
|
|
|
|
|
|
|
|
|
| FIC |
| SOC |
| USOC Jack |
| REN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 02LS2 |
| 9.0F |
|
| 0.2 |
|
| |
|
|
|
|
|
|
|
|
|
|
|
WARNING: Ask your local telephone company for the modular jack type installed on your line. Connecting this machine to an unauthorized jack can damage telephone company equipment. You not Xerox, assume all responsibility and/or liability for any damage caused by the connection of this machine to an unauthorized jack.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local Telephone Company. The REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 02 is a REN of 0.2)
x
