US E R G U I D E (MA C H I N E A D M I N I S T R A T O R )
Receiving
Receiving Buffer-NetWare
Choose from the following options:
•Off - Spooling is not performed.
While the machine is processing or printing LPD data from a client, it cannot receive other data from other clients through the same interface. The LPD reception buffer can be set between 64 ~ 1024 KB, in increments of 32 KB. The default is 256 KB.
•Memory - Spooling is performed.
Memory is used as the reception buffer for the spooling process. The size of the reception buffer for the spooling process can be set between 512 KB ~ 32.00 MB, in increments of 0.25 MB. The default is 1.00 MB.
NOTE:Printing data bigger than the memory size set here cannot be received. If this happens, select Hard Disk Spooling or Spooling Off.
•Hard Disk - Spooling is performed.
Hard drive is used as the reception buffer for the spooling process.
The default is Off.
Set the reception buffer for NetWare.
The memory size can be set between 64 ~ 1024 KB, in increments of 32 KB. The default is 256 KB.
