US E R G U I D E (C O P I E R )
Making Copies Using Features
The feature tabs on the Touch Screen enable you to configure the printer/copier to suit your copying needs.
The procedure below leads you quickly through a number of features you may want to use in making copies. It assumes that the feature tabs are in the default configuration.
For more information about copy features, refer to the section entitled Copier Features, in this chapter.
1Press Clear All to clear any previous programming
Use any of the following steps that apply to your job and desired outcome.
2Use the Numeric Keypad to enter the desired quantity. If you make a mistake, press the Clear button on the numeric keypad to clear an incorrect quantity
3Select the option in Output Color if a setting other than the default, Auto Color, is desired.
Perform one of the following:
•Press the desired Output Color option on the Basic Copying tab.
•Press More… to see additional options
Press the desired option and press the Save button to return to the Basic Copying screen.
