![](/images/new-backgrounds/1185711/185711179x1.webp)
US E R GU I D E (CO P I E R )
Border Erase
The Border Erase feature enables you to eliminate unwanted marks near the edges of the original from the output copy. The range for Border Erase is 0 through 50mm in 1mm increments.
Border Erase options can be used individually or combined together:
Top & Bottom For Normal the default is 2mm. For Variable Erase the default is 5mm.
Left & Right For Normal the default is 2mm. For Variable Erase the default is 5mm.
Center The default is 0mm.
The selected settings are applied to both sides of
When the image is reduced or enlarged, the selected percentage will be applied to the Border Erase. For example, if Variable Erase is set to 30mm, a 50% reduction will result in 15mm of border erase on the output.
When making copies the copier adds a margin of 2mm to all sides. This cannot be eliminated.