US E R GU I D E (MA C H I N E AD M I N I S T R A T O R )
Receiving
Receiving
Receiving
Receiving Buffer - Port9100
Choose from the following options:
•Off - Spooling is not performed.
While the machine is processing or printing SMB data from a client, it cannot receive other data from other clients through the same interface. The SMB reception buffer can be set for 64 ~ 1024 KB, in increments of 32 KB. The default is 256 KB.
•Memory - Spooling is performed.
Memory is used as the reception buffer for the spooling process. The size of the reception buffer can be set between 512 KB ~ 32.00 MB, in increments of 0.25 MB. The default is 1.00 MB.
NOTE:Printing data bigger than the set memory size cannot be received. If this happens, select Hard Disk Spooling or Spooling Off.
•Hard Disk - Spooling is performed.
Hard drive is used as the reception buffer for the spooling process.
The default is Off.
Choose from the following options:
•Off - Spooling is not performed.
While the machine is processing or printing IPP data from a client, it cannot receive other data from other clients through the same interface. The IPP reception buffer can be set between 64 ~ 1024 KB, in increments of 32 KB. The default is 256 KB.
•Hard Disk - Spooling is performed.
Hard drive is used as the reception buffer for the spooling process.
The default is Off.
Set the reception buffer for EtherTalk.
The size can be set between 64 ~ 1024 KB, in increments of 32 KB. The default is 256 KB.
Set the reception buffer for Port9100.
The size can be set between 64 ~ 1024 KB, in increments of 32 KB. The default is 256 KB.
