11

IP Setup

The IP Setup screen allows you to configure a device IP address, subnet mask and DNS (domain name server) for management purposes.

To open this screen, click Basic Setting, IP Setup.

Figure 44 IP Setup

The following table describes the labels in this screen.

Table 16 IP Setup

LABEL

DESCRIPTION

IP

Enter the IP address of your IES-612-51A in dotted decimal notation for

 

example 1.2.3.4.

 

 

IP Mask

Enter the IP subnet mask of your IES-612-51A in dotted decimal notation for

 

example 255.255.255.0.

 

 

Apply IP setting

Click Apply IP setting to save your changes to the device’s IP address and/or

 

subnet mask to the IES-612-51A’s volatile memory. The IES-612-51A loses

 

these changes if it is turned off or loses power, so use the Config Save link on

 

the navigation panel to save your changes to the non-volatile memory when you

 

are done configuring.

 

 

Cancel

Click Cancel to begin configuring the fields again.

 

 

Default Gateway

Enter the IP address of the default outgoing gateway in dotted decimal notation.

 

 

Apply Gateway

Click Apply Gateway setting to save your changes to the device’s IP address

setting

and/or subnet mask to the IES-612-51A’s volatile memory. The IES-612-51A

 

loses these changes if it is turned off or loses power, so use the Config Save

 

link on the navigation panel to save your changes to the non-volatile memory

 

when you are done configuring.

 

 

Cancel

Click Cancel to begin configuring the fields again.

 

 

 

103

IES-612-51A User’s Guide