18
Static Multicast
This chapter describes the Static Multicast screen.
18.1 Static Multicast
Use static multicast to allow incoming frames based on multicast MAC address(es) that you specify. This feature can be used in conjunction with IGMP snooping/proxy to allow multicast MAC address(es) that are not learned by IGMP snooping or IGMP proxy. Use static multicast to pass routing protocols, such as RIP and OSPF.
18.2 Static Multicast Screen
To open this screen, click Advanced Application, Static Multicast.Figure 76 Static Multicast
The following table describes the labels in this screen.
Table 42 Static Multicast
LABEL | DESCRIPTION |
The Number of | This is the number of static multicast entries configured on the |
Static Multicast |
|
|
|
Page X of X | This identifies which page of information is displayed and the total number of |
| pages of information. |
|
|
Previous | Click one of these buttons to show the previous/next screen if all status |
Next | information cannot be seen in one screen. |
|
|
Reload | Click this button to refresh the screen. |
|
|
| The first table displays the names of the fields. The subsequent tables show the |
| settings of the IGMP groups. |
|
|
Index | This is the static multicast group index number. |
|
|
| 163 |
|
|