ZyXEL Communications IES-612-51A 3.2.1 Console Port, 3.2.1.1 Default Ethernet Settings

Chapter 3 Front Panel

Table 2 LEDs (continued)

LED	COLOR	STATUS	DESCRIPTION
SYS	Green	On	The IES-612-51A’s system is running.
		Blinking	The IES-612-51A is booting.
		Off	The IES-612-51A’s stem is not running.
ETHERNET	Green	On	The IES-612-51A has a successful 10 Mbps connection
(1~2)			on this port.
		Blinking	The IES-612-51A is sending/receiving data on this port.
	Orange	On	The IES-612-51A has a successful 100 Mbps
			connection on this port.
		Blinking	The IES-612-51A is sending/receiving data on this port.
ADSL (1~12)	Green	On	The IES-612-51A has a successful DSL connection.
		Blinking	The IES-612-51A is looking for a DSL connection.
		Off	The IES-612-51A does not have a DSL connection.

3.2.1 Console Port

For local management, you can use a computer with terminal emulation software configured to the following parameters:

•VT100 terminal emulation

•9600 bps

•No parity, 8 data bits, 1 stop bit

•No flow control

Connect the male 9-pin end of the console cable to the console port of the IES-612-51A. Connect the female end to a serial port (COM1, COM2 or other COM port) of your computer.

3.2.1.1 Default Ethernet Settings

The factory default negotiation settings for the Ethernet ports on the IES-612-51A are:

•Speed: Auto

•Duplex: Auto

50
	IES-612-51A User’s Guide