Chapter 42 Command Examples
An example is shown next.
Figure 135 Isolation Show Example
ras> switch isolation show system isolation: enabled
42.4.2 Isolation Enable Command
Syntax:
ras> switch isolation enable
This command turns on the subscriber isolation feature.
42.4.3 Isolation Disable Command
Syntax:
ras> switch isolation disable
This command turns off the subscriber isolation feature.
42.5 Statistics Monitor Command
Syntax:
ras> statistics monitor
This command shows the current hardware status (voltage and temperature).
An example is shown next.
Figure 136 Statistics Monitor Command Example
ras> statistics monitor |
|
|
|
|
|
| |||
Hardware monitor status: enabled | current | min | max | avg status | |||||
| nominal limit(hi) limit(lo) | ||||||||
1.200 | 1.344 | 1.056 | 1.152 | 1.139 | 1.152 | 1.148 | Normal | ||
v1(v) | |||||||||
v2(v) | 1.800 | 1.944 | 1.656 | 1.820 | 1.820 | 1.820 | 1.820 | Normal | |
v3(v) | 3.300 | 3.564 | 3.036 | 3.200 | 3.200 | 3.200 | 3.200 | Normal | |
v4(v) | 18.000 | 19.440 | 16.560 | 18.175 | 18.175 | 18.175 | 18.175 | Normal | |
| limit(hi) | limit(lo) | current | min | max | avg | status |
t1(c) | |||||||
97.000 | 43.000 | 40.000 | 52.000 | 43.000 | Normal | ||
t2(c) | 97.000 | 46.000 | 41.000 | 59.000 | 46.000 | Normal | |
t3(c) | 97.000 | 47.000 | 42.000 | 58.000 | 47.000 | Normal | |
42.6 Statistics Port Command
Syntax:
ras> statistics port <portlist> [<vpi> <vci>] [clear]
| 281 |
|
|